Set Up System

Overpass font

Install Cura

Install Fusion 360

Set up printer

Anycubic Vyper

Vyper

• Install drivers, firmware
• Run Vyper auto-leveling procedure
• Run filament feeding procedure
• Run all Teaching Tech 3d printer calibrations

Settings

1. Flow = 85%
2. Speed = 50 mm/s
3. PLA printing temp = 210 C
4. Z Hop = enabled, only over printed parts, 1 mm
5. Retract distance = 6
6. Retract speed = 80 mm/s
7. Acceleration = 3000